Magnetic-Drive Pump

Series M

Penguin magnetic-driven pumps are designed to handle a wide range of chemicals without difficulty. Constructed of polypropylene, kynar, or stainless steel, Series M pumps have an upper working temperature of 190/220/250?F, respectively, and thus can handle highly corrosive or mild chemicals, acids, or solvents. Series M pumps eliminate the conventional shaft seal found in most pumps. This means that there is no rotating seal to wear out and allow the liquid being pumped to leak out. The pumping action may eventually fail, however, the liquid can never leak out. Series M pumps are easy to install and operate, and are virtually maintenance-free.

Available Product Options

Horsepower:	1/15
	1/10
	1/5
	1/3
	1/2
	3/4
	2
	3
	5

Construction Material/ O-Ring:	B = Polypropylene
	C = PVDF/Kynar
	S = 316SS
	H = Hastelloy

Self Primer:	SP = Self Priming Pump/1 HP Motor

Available Product Models


		Model No. M-1/14B Polypropylene Construction, 10 GPM max flow or 20.5 Ft. max head, 1/15 HP, 3000/2500 RPM

		Model No. M-1/8B Polypropylene Construction, 14 GPM max flow or 21.5 Ft. max head, 1/10 HP, 3450 RPM

		Model No. M-1/8C PVDF Construction, 14 GPM max flow or 21.5 Ft. max head, 1/10 HP, 3450 RPM

		Model No. M-1/4B Polypropylene Construction, 17 GPM max flow or 31 Ft. max head, 1/4 HP, 3450 RPM

		Model No. M-1/4C PVDF Construction, 17 GPM max flow or 31 Ft. max head, 1/4 HP, 3450 RPM

		Model No. M-1/3B Polypropylene Construction, 27 GPM max flow or 41 Ft. max head, 1/3 HP, 3450/2850 RPM

		Model No. M-1/3C PVDF Construction, 27 GPM max flow or 41 Ft. max head, 1/3 HP, 3450/2850 RPM

		Model No. M-1/3S 316SS Construction, 27 GPM max flow or 41 Ft. max head, 1/3 HP, 3450/2850 RPM

		Model No. M-1/2B Polypropylene Construction, 35 GPM max flow or 48 Ft. max head, 1/2 HP, 3450/2850 RPM

		Model No. M-1/2C PVDF Construction, 35 GPM max flow or 48 Ft. max head, 1/2 HP, 3450/2850 RPM

		Model No. M-3/4B Polypropylene Construction, 53 GPM max flow or 63 Ft. max head, 3/4 HP, 3450/2850 RPM

		Model No. M-3/4C PVDF Construction, 53 GPM max flow or 63 Ft. max head, 3/4 HP, 3450/2850 RPM

		Model No. M-3/4S 316SS Construction, 53 GPM max flow or 63 Ft. max head, 3/4 HP, 3450/2850 RPM

		Model No. M-3/4H Hastelloy Construction, 53 GPM max flow or 63 Ft. max head, 3/4 HP, 3450/2850 RPM

		Model No. M-2C PVDF Construction, 82 GPM max flow or 85 Ft. max head, 2 HP, 3450 RPM

		Model No. M-3B Polypropylene Construction, 135 GPM max flow or 95 Ft. max head, 3 HP, 3450 RPM

		Model No. M-3S 316SS Construction, 135 GPM max flow or 95 Ft. max head, 3 HP, 3450 RPM

		Model No. M-10C PVDF Construction, 200 GPM max flow or 150 Ft. max head, 10 HP, 3450 RPM